What this means for the customer — match this line when the carbon black agglomerates and the fineness will not grind down: the main complaint this product addresses.What this means for the customer — match this line when two colours separate and flood in the film: check the feed order first.What this means for the customer — match this line when the film colour is uneven and floating: combine it with the compatibility check.What this means for the customer — match this line when the colour paste separates and settles on standing: storage and redispersion are covered separately.
What this means for the customer — one band sets the dosage directly: 2–4% is the main basis, high-surface-area carbon black takes the upper end and ordinary colour carbon black the lower end, with no return to the table to rework the denominator.What this means for the customer — where the product sits on the molecular-weight scale: when pairing with other dispersants in the system, compare this row first, then decide which one is the main agent.What this means for the customer — three must-reads before charging: solids content sets how much is actually added, density sets the weighing conversion, and pH below 3.5 decides whether acid-rated equipment and protection are needed.What this means for the customer — white flakes in a drum opened in winter: heat above 40℃ and they redissolve completely with no loss of performance. This separates normal crystallisation from degradation.What this means for the customer — below 5℃ in the warehouse the material is frost-damaged: this gives the lower storage limit directly, with no need to ask the supplier.What this means for the customer — four steps locked in order: for 'can I add the carbon black first', point at this figure. Order is the process, and powder first always disperses badly.What this means for the customer — why dilution does not separate: the core absorbs while the outer shell repels, three layers acting together; the mechanism can be explained without chemistry jargon.What this means for the customer — three handling steps for winter flakes: usable at ambient, or heat to 40–50℃ and stir for 10 minutes to restore it. The customer can handle this without a return or exchange.What this means for the customer — the four-step order broken into four in-tank states: the customer can describe what the batch looks like after each step instead of a vague 'it is dispersed'.What this means for the customer — time budget: dilution 3–5 minutes, premix 10 minutes, multi-stage grinding; the customer can compute single-batch labour time straight into scheduling.What this means for the customer — dual stabilisation split into what holds what: for 'will added salt break it', this explains what the charge layer and the steric layer each take care of.What this means for the customer — three tolerances at a glance: acid, added salt, then emulsion, and none of the three breaks it down. For 'will it work in my system', match the band.What this means for the customer — VOC band chart: to clear an environmental limit, the customer sees at a glance which band this product falls in, with no extra report to request.What this means for the customer — use within 6 months of opening, placed on the temperature axis: 'how long will an opened drum last' is answered here.What this means for the customer — foaming by band: low foaming means only a little antifoam is needed, so its cost can be built into the quote.What this means for the customer — pick the side by carbon black type: ultrafine, high-surface-area grades take the upper end and ordinary colour grades the lower end; change the dosage accordingly when the customer switches grade.What this means for the customer — the dosage column for neighbour R410 is blank: this says plainly that R410's figures cannot benchmark R400, avoiding a wrong purchase made by number association.What this means for the customer — selectable levels beside the neighbouring model: when the customer brings another supplier's figures, first establish whether the denominator is the same.What this means for the customer — three emulsions named one by one: waterborne acrylic, PU or styrene-acrylic. Against this table the customer confirms no gloss loss and no loss of water resistance.What this means for the customer — dosage in three readable lines: a screenshot can go straight to the shop floor, with no full-page PDF needed.What this means for the customer — two packs (25 kg plastic pail / 200 kg plastic sealed drum) with their shelf lives in one view, so price comparisons stay on the same basis.What this means for the customer — seven metrics in one view: when the customer asks which numbers you actually have, this figure is the list, with no table to page through.What this means for the customer — three destinations, ink / coatings / conductive paste, with dosages side by side: moving from ink to conductive paste does not require re-trialling the addition ratio.What this means for the customer — basis confirmation: every tick on the axis is 'of total coating liquid mass'; multiplying 2–4% by the powder weight is simply wrong.What this means for the customer — grinding viscosity reduction is qualitative, with no magnitude given: the figure marks direction only, so it cannot be quoted as a measured curve.What this means for the customer — acid boundary: pH below 3.5 means gloves and goggles are mandatory and direct co-charging with strong alkali is not allowed; read this figure at the shop-floor safety briefing.What this means for the customer — basis and no-conversion read together: when the customer tries to apply the neighbouring model's figures, this line rules it out and prevents a scrapped batch.What this means for the customer — three dosage levels as side-by-side bars: with three formulations in hand, bar height shows which level uses the least material.What this means for the customer — seven physical and chemical metrics cell by cell: the customer checks row by row against their own COA, missing items are visible at once, and nothing rests on a verbal assurance.What this means for the customer — four items read in one line: solids content, basis, storage window and sealed shelf life are all covered here.What this means for the customer — four charging steps as a full chain, multi-stage grinding included as step 4: follow all four, and the closing 'never' points at pre-soaking dry carbon black powder, the most frequent cause of failure.What this means for the customer — four application ranges from the manual named cell by cell: industrial coatings, Li-ion paste, colour paste or ink; each takes its matching seat.What this means for the customer — three emulsion compatibility bands: acrylic, PU or styrene-acrylic. Whichever is in the system, the band confirms no loss of gloss and no drop in water resistance.What this means for the customer — four effect lines layered: viscosity reduction, electrolyte tolerance, compatibility, low foam and low VOC, one per line; the closing 'not applicable' marks that jetness and tinting-strength gains are not quantified in the document and are not invented.What this means for the customer — three storage bands: 5–35℃ normal, 0–5℃ prone to crystallisation, below 0℃ no freezing. If the drum is left unsealed in winter, this explains the flakes that appear.What this means for the customer — two shelf lives kept distinct: 18 months sealed in the original pack, use within 6 months of opening; count backwards from the opening date.What this means for the customer — two pack sizes side by side: a 25 kg pail for trial runs, a 200 kg sealed drum for volume; choose directly by output scale.What this means for the customer — three boundaries against R410 side by side: category, composition and dosage denominator all differ; where the customer associates by number, show this table.What this means for the customer — four models in the same family bounded: only R400 has a recorded dosage; neighbours without data read 'not stated' rather than being filled in from another product. This is the sheet that stops a mis-costed budget.What this means for the customer — four safety points, one per cell: operators follow these four, and the acidic product, no co-charging with strong alkali and not flammable are the three that matter most.
What this means for the customer — match to industrial topcoats and primers: the standard band, starting at 2–4%.What this means for the customer — match to anti-corrosion waterborne coatings: the standard band, 2–4%, on the same denominator.What this means for the customer — conductive paste on an ultrafine carbon black system: take the upper limit, 3.0–4.0%.What this means for the customer — match to lithium-battery coating slurry: on an ultrafine system, trial at the upper limit.What this means for the customer — match to interior/exterior latex paint black paste: start on the standard band.What this means for the customer — match to concentrated black paste: the standard band, 2–4%, with dilution counted back on the total mass.What this means for the customer — match to waterborne printing inks: the standard band; for compatibility see the table.What this means for the customer — match to wood black topcoat: start on the standard band; for protection see the safety cell.
What this means for the customer — for COA checking: verify the molecular weight row against 2600–5500 on the GPC basis.What this means for the customer — for COA checking: verify the solid content row against ≥30% by the loss-on-drying method.What this means for the customer — for COA checking: verify the density row against 1.03 at 20℃.What this means for the customer — for COA checking: read pH on the 1% aqueous solution basis, not the neat liquid.What this means for the customer — workshop protection check: gloves plus goggles, mandatory for the acidic product.What this means for the customer — eye-splash first aid as written: water for 15 minutes, medical attention if necessary.What this means for the customer — check before mixing: strongly alkaline materials must not be mixed in directly in large amounts.What this means for the customer — shipping and transport check: not a flammable product; ordinary road and sea freight are both acceptable.What this means for the customer — check on receipt: a COA accompanies every batch, on the ex-works typical-value basis.
