What this means for the customer — incoming-inspection benchmark, first item: surface consistency — no noticeable difference in graininess.What this means for the customer — incoming-inspection benchmark, second item: compatibility — does not drag down the mechanical properties of the substrate.What this means for the customer — incoming-inspection benchmark, third item: dispersibility — disperses in the melt, adding no processing difficulty.What this means for the customer — incoming-inspection benchmark, fourth item: thermal stability — performance stable within the processing temperature range.
What this means for the customer — one band gives both start and ceiling: answer 0.5% to 'how much do I start with' and 5% to 'how much can I add at most', without going back to the table.What this means for the customer — process-temperature window: set the machine to 180–230℃. Running outside it is a PP problem, not a problem of this product.What this means for the customer — packing and shelf life in two readable lines: compare on the same basis (whole 25 kg bag, 12 months) so pails are not used as the benchmark.What this means for the customer — basis confirmation: every tick is 'of PP resin weight'; multiplying it by the finished part weight is simply wrong.What this means for the customer — storage boundary: ambient, cool and dry is fine; moisture ends it, which is the premise of the 12-month bottled shelf life. Label the warehouse from this figure.What this means for the customer — three components and their jobs at a glance: micro-flakes build the surface, the dispersant aids dispersion, the compatibilizer protects mechanicals. When the customer asks about dropping one, answer layer by layer.What this means for the customer — matte optics in three steps: specular highlight, micro-rough surface, diffuse reflection; explaining why it goes matte needs no optics vocabulary.What this means for the customer — three charging steps: blend with PP resin in ratio, then disperse, then process. For 'do I need to premix', the answer is yes.What this means for the customer — three states from charging to finished surface: when the customer asks what the intermediate and the finished article look like, describe them from this figure.What this means for the customer — two process conditions: blend at ambient temperature and pressure, then process in the normal PP window of 180–230℃; the customer can copy this straight into planning.What this means for the customer — the three-component compound broken into three separate jobs: the customer can cost each component and judge whether it earns its place.What this means for the customer — three process-temperature bands: below 180℃ it will not disperse, above 230℃ is the PP degradation zone; a wrong setting is located on this band.What this means for the customer — dosage limits: below 0.5% no matte effect appears, above 5% there is no documented basis; stop an over-dose at the band.What this means for the customer — feel bands: choose a band for fine or anti-slip. The document gives no measured matting value, so the figure marks direction without inventing a number.What this means for the customer — shelf life tied to temperature: 12 months at ambient and dry, but moisture ingress ends it. 'Can I leave it for six months over summer' is answered here.What this means for the customer — four neighbouring grades and their bases: R900 on powder, R900A and R902 on the finished part, R930 on PP resin; a wrong denominator is the most frequent accident.What this means for the customer — four neighbouring grades by category: when the customer says they want a 900, this figure separates the 4 grades in the 900 series at once.What this means for the customer — four dosage ceilings as bars: for 'can I add more than that', it is immediately clear that only R900A has the higher ceiling.What this means for the customer — only three parameters for this grade, as the document has no physical/chemical table; listing them honestly tells the customer what to ask for and stops further requests for density or viscosity.What this means for the customer — three scenarios named one by one: for cups, for knobs and for packaging film, the match is immediate.What this means for the customer — basis and no-conversion read together: when the customer tries to apply the neighbouring model's figures, this line rules it out.What this means for the customer — three feel levels as bars: a finer feel at the low end, more anti-slip at the high end; the direction is immediately clear.What this means for the customer — process temperature as its own chart: the shop can cut out this one sheet and post it beside the injection moulding machine.What this means for the customer — three functional directions laid out by dosage band: whether the customer needs dispersion, matting or compatibility, they match the band and do not have to buy the whole set.What this means for the customer — four manual features layered: matte evenness, compatibility without loss of mechanicals, easy dispersion, stability across the temperature range; inspection checks these four, and any gap can be raised on the spot.What this means for the customer — three components in three steps: micro-flakes build the texture, the additive aids dispersion, the compatibilizer protects mechanicals. When the customer asks why three are compounded, answer from these three lines.What this means for the customer — three-point comparison: specular before dosing, micro-surface scattering into diffuse reflection after; explain why it hazes with this figure, without memorising data.What this means for the customer — three processes and their temperatures, one per cell: blow moulding, thermoforming and extrusion all run in the normal PP window of 180–230℃, with no equipment change.What this means for the customer — three dosage statements side by side: manual, official field and detail page all read 0.5–5%, so whichever one the customer quotes the answer matches, and the denominator is always PP resin weight.What this means for the customer — four grades, four bases: R930 on PP resin weight, R900 on powder, R900A and R902 on the finished part. This is where budgets go wrong most often, so figures must not move between the four.What this means for the customer — four functional directions kept apart cell by cell: matting, dispersion, carrier and external lubrication do not substitute for one another; use this table to rule out number-based assumptions.What this means for the customer — production status per grade: R900 is discontinued, marked in grey on the website; check this table before applying a neighbouring grade's figures.What this means for the customer — four packing, storage and protection items: 25kg/bag, 12-month shelf life, cool and dry, mask when handling powder. Two apply at receipt and two at charging.What this means for the customer — four functional boundaries: R930 only does surface matting; it does not substitute for dispersion, flame retardancy or insulation, and is not an equivalent. Use this table for any cross-price comparison.What this means for the customer — three reading limits: the temperature shown is the normal PP window, not this product's heat resistance; the matting-degree basis is not given; appearance is not listed. Answer these three factually, with no extrapolation.What this means for the customer — three scenarios with named articles: cup, knob or packaging film. The fit is clear without going back to the long text.What this means for the customer — three official application labels as written: PP matting / PP surface treatment / decorative PP; the customer maps their own article without extrapolating beyond the class.What this means for the customer — masterbatch-line relation marked as it stands: the document establishes no mapping between R930 and any masterbatch grade, so it is treated as not applicable; 'can it be used as a masterbatch' is answered from this line.What this means for the customer — three missing numbers stated as they are: matting roughness Ra, the gloss value and the physical/chemical table are all absent. For acceptance criteria, state what both sides agree, keep a retained sample, and never invent a number.
What this means for the customer — match to the cups and tableware line: the daily-goods grade, 0.5–5% adjusted by feel.What this means for the customer — match to storage boxes: the same 0.5–5% window; adjust the matte feel through a small trial.What this means for the customer — match to handles and knobs: the anti-slip requirement of industrial parts, the same window as above.What this means for the customer — match to housings: for parts that need a quality texture, start the trial on the same window.What this means for the customer — match to matte film: the packaging-material line, 0.5–5% in the same window.What this means for the customer — match to packaging boxes: the same line as film, with the feel fine-tuned as required.What this means for the customer — match to the blow moulding line: normal PP 180–230℃, on conventional equipment.What this means for the customer — match to the thermoforming line: temperature as above, no modification of the line needed.What this means for the customer — match to the extrusion line: a blow moulding machine or extruder, conventional equipment, is sufficient.
What this means for the customer — check the denominator before weighing out: 0.5–5% is based on PP resin weight, so do not apply a neighbouring grade's figure.What this means for the customer — machine-setting check: 180–230℃ is the normal PP reference, not this product's temperature resistance.What this means for the customer — feeding check: mix thoroughly with the PP resin first, then process as normal.What this means for the customer — the warehouse label copied as it stands: cool, dry, ventilated and moisture-proof; once damp the product is no longer effective.What this means for the customer — check on receipt: 25 kg/bag, 12 months under proper storage conditions.What this means for the customer — feeding protection as written: gloves and mask against dust; take care in powder handling.What this means for the customer — how to answer a compliance enquiry: the halogen statement does not apply; request documents by part number.
